BOYU wave maker WM1

confirm that the voltage and frequency of the power are up to the specifications marked on the nameplate of product before using this product. ?The installation position of plug for this pump should be higher htan the max. water-level of the aquarium,or let the power-wire downwards and then let it upwards before connecting to the socket to prevent water from flowing into the socket via the wire and result in accident of electrical leakage. ?Install the rubber acetabula on the base of the pump.Then properly place the pump on bottom or wall of aquarium,slightly press the pump,and it will be firmly fixed. Or the pump can be hanged on the end of aquarium with fixing bar.Also you can use the magnet base to locate this pump in a proper position. ?If the pump is not in use for a long time,remove it out of water wipe it dry and store it in cool and dry place for future use. Product Attributes: Model:WM-1 Model WM-1 WM-101 WM-15 Size 11.3×10.8x11cm (4.45×4.25×4.33Inch) 8.5×7.8×8.4cm (3.35×3.07×3.31Inch) 11.3×10.8x11cm (4.45×4.25×4.33Inch) Power 28W 7W 16.5W Suitable for Water level 40-300L 20-120L 80-350L Others Voltage: 220-240V Freauency: 50/60Hz Note Not suitable for USA 110V electricity supply.You need to buy a VOLTAGE CONVERTER 110V TO 220V TRANSFORMER Package Include: 1 x Boyu WM-1 Aquarium Wave Maker Note: 1.Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please understand. Make sure you don’t mind before you bid. 2.Please allow 1-5mm differences due to manual measure